When Chevrolet moved the Corvette's engine behind the driver for the C8, the manual transmission disappeared with the old layout. The car launched with a dual-clutch automatic as its only gearbox, and that remains the case. As The Drive's reviewer frames it — while noting he was not part of the decision — developing two new transaxles, one manual and one automatic, that could mate to a mid-engine car was beyond GM's budget, and executives chose the comparison-test performance of the automatic over pleasing a small group of manual enthusiasts.
Tremec, the supplier behind the six-speed manual used in GM performance models including the Cadillac Blackwing cars and the now-departed Camaro, has nonetheless built a working manual C8. The company invited The Drive and several potential customers to sample its transmission lineup at Motorsports Gateway, a new private track outside Howell, Michigan, that is so recent it does not yet appear on Google. The vehicle provided was a Peitz Performance C8 race car fitted with Tremec's manual gearbox — a one-of-one build, offered with the instruction to avoid hitting anything.
It is a competition car rather than a road car. The interior has no trim finish to speak of, the shifter emerges from the space normally occupied by the storage cubby and the automatic gear selector, and the cabin is fully caged with a full harness. The seating position offers virtually no adjustment.
What the conversion required
Fitting the manual did not demand major changes to the car itself. The center tunnel had to be cut to install the clutch pedal hardware, but the gearbox sits exactly where the stock dual-clutch unit would, with no special mating parts required. The C8's pedal box has enough room for a clutch pedal; even with the third pedal fitted, The Drive found the footwell roomier than a previous-generation Camaro's.
How it shifts
The transaxle does not feel the same as Tremec's front-engine TR-6060 six-speed. Because the shifter is remotely mounted — one of its cables can be seen running rearward toward the gearbox in the Peitz car — the linkage is less precise and less notchy than in a front-engine application, where the selector connects directly to the transmission. Some drivers may prefer the smoother action; others may miss the more mechanical feel of the front-engine version. The alternative fixes would mean moving the engine forward, which amounts to a C7, or moving the shifter rearward to roughly where the C8's engine is mounted.
The fixed seating position also limited how hard the car could be pushed. The Drive's reviewer, at 5 feet 7 inches, could not reach the floor to brace himself in corners or heel-and-toe comfortably, and the session took place on a green track on a November afternoon in Michigan.
Cost and potential customers
Price is the larger obstacle. The gearbox alone is quoted at about $75,000, which, added to the cost of a Corvette, puts a manual C8 build in the same territory as a showroom-spec Z06. Tremec says that figure will come down as volume increases. The company reports interest from OEMs, and not necessarily or exclusively GM; other automakers are said to want a high-torque manual transaxle, though Tremec did not name them. Because the gearbox was engineered to fit the C8, the packaging work is already done for anyone else who wants it.
